Google+ JMT Hex-rotor Hexacopter RTF w/ F550 Flamewheel Kit + Kk 2.3 Controller + ESC Motor Weld&debug Battery Tx Rx Pros - Drones HomeDrones Home

JMT Hex-rotor Hexacopter RTF w/ F550 Flamewheel Kit + Kk 2.3 Controller + ESC Motor Weld&debug Battery Tx Rx Pros

March 3, 2014 - Comment

The adapter send based on the stock of the factory , that have the same function Tips:1 / 3 / 5 is CW Propeller ,2 / 4 / 6 is CCW Propeller The color of the Flamewheel arms,will be changed by manufactured.Random shipped,if you have request,please contact in advance to confirm inventory,no negative or dispute

Buy Now! $310.95Amazon.com Price
(as of 12:26 UTC - Details)

The adapter send based on the stock of the factory , that have the same function

Tips:1 / 3 / 5 is CW Propeller ,2 / 4 / 6 is CCW Propeller

The color of the Flamewheel arms,will be changed by manufactured.Random shipped,if you have request,please contact in advance to confirm inventory,no negative or dispute accepted for the color reason,thanks understand and help again

JMT 30A Brushless ESC

11.1V 3300Mah 25C Lipo battery

RadioLink T6EHP-E 2.4G 6Ch TX&RX

Introduction:

FlameWheel F550 (Notice Not Made by DJI) is a multi-rotor designed for all pilots for fun or AP, it can achieve hovering, cruising, even rolling and other flight elements. This combo we provide KKmulticopter 2012 flight controller with 2.3 firmware,it also can suprisingly have this effect.

It can be applied for entertainment, aerial photography, FPV and other aeromodelling activities.New design PCB board speical for F550,support standard 50mm controller board like MK,KK, FF,MWC.

Uniqueness:

– Plate board with build-in KKmulticopter control board!

– Weld and debug For the main Plate with KK controller,esc,motor,Receiver

Specifications:

– Model Flame Wheel 550 (F550)

– Weight: about 1106gram(not include battery)

– Diagonal Wheelbase 550mm *1

– Propeller 10 ×4.5in * 3-pairs

– Brushless Motor A22122 13T *6

– Brushless ESC 30A*6

– KKMulticopter V2.3 Circuit board Flight Controller With

AVR USB Programmer* 1

– FMT 11.1V 3300Mah 25C Lipo battery *1

– RadioLink T6EHP-E 2.4G 6Ch Transmitter and Receiver *1

– Balance charger + Adapter *1 set

– connecting Plug *1 bag

(Some parts have been tested and weld before shipped)

Comments

Leave a Reply