Google+ DJI Phantom 2 V2.0 Quadcopter w/Battery +Charger +Zenmuse H3-3D For GoPro 3+ 4 - Drones HomeDrones Home

DJI Phantom 2 V2.0 Quadcopter w/Battery +Charger +Zenmuse H3-3D For GoPro 3+ 4

May 12, 2015 - Comment

DJI Zenmuse H3-3D 3-Axis Gimbal for GoPro Hero3 GoPro Hero3+ Camera, -130 – +45deg. Controlled Rotation Range, I130deg./s Rotation Speed (Phantom 2 version) The Zenmuse H3-3D 3-Axis Gimbal for GoPro HERO3/3+/4 from DJI is a camera stabilization device that is exclusively for the DJI Phantom 2 Quadcopter. It is driven by a 3-axis brushless gimbal

DJI Zenmuse H3-3D 3-Axis Gimbal for GoPro Hero3 GoPro Hero3+ Camera, -130 – +45deg. Controlled Rotation Range, I130deg./s Rotation Speed (Phantom 2 version) The Zenmuse H3-3D 3-Axis Gimbal for GoPro HERO3/3+/4 from DJI is a camera stabilization device that is exclusively for the DJI Phantom 2 Quadcopter. It is driven by a 3-axis brushless gimbal that not only supports tilting and canting, like the previous H3-2D model, but also panning as well. Not only will it keep your aerial video’s horizon level and isolated from vibration, the gimbal can also be used to remotely operate there camera, allowing you to adjust the camera angle with ±0.08° accuracy in flight. Electronically, the gimbal is designed to operate plug and play with the Phantom 2; however you may or may not require additional mounting hardware depending on which version of Phantom 2 you have. The first version of the Phantom 2 (V.1) has a small, rectangular opening on the bottom of the airframe that was optimized for the H3-2D gimbal, and is too small for the H3-3D. Conversely, the Phantom 2 V.2 has a larger round opening. If your aircraft is identified at the V.1 you will need part CP.PT.000107, available separately, which includes the mounting adapter and extended landing gear required. If you are using the later Phantom 2 (V.2 or later), then no additional mounting hardware is required, and the original landing gear can still be used. Note: This system is for the naked, unmodified GoPro HERO3, HERO3+, or HERO4 action cameras only. Camera add-ons such as filters or housings will throw off the balance and could damage the gimbal. Brushless servo control Aluminum allow body Built-in IMU module Based on Zenmuse technology DJI Phantom 2 V2.0 Quadcopter GoPro camera not included. The all new Phantom 2 V3 features upgraded motors, ESC boards, propellers, compass as well as a newly designed remote control. The NPVT581 rc transmitter now has a built in rechargeable lithium battery that eliminates the previous need for AA batteries. It also features a gimbals control dial, 4 L.E.D. battery level indicator and trailer port allowing you to use it with flight simulators on your computer. The all new 2312 motors has new bearings, stator technology, insulation coating, and electromagnetic design which all improve heat dissipation, efficiency, output power, and aerodynamic performance. The DJI Phantom V3 also includes 8 x 9450 propellers which are designed to provide extra thrust and better power efficiency. Lastly, the V3’s all new compass module comes with a protective shell to prevent static. Please see the photo gallery for additional details of the upgrades. Bullets change to: Includes all new Phantom 2 Version 3 (Released 10/30/2014) and H3-3D Zenmuse Gimbal for GoPro Hero3 and Hero4 Lots of upgrades, read about them in the description below or gallery photos! Includes H3-3D Gimbal for GoPro Hero3 and Hero4

Comments

Leave a Reply